Hostname: page-component-cb9f654ff-k7rjm Total loading time: 0 Render date: 2025-08-19T20:44:38.992Z Has data issue: false hasContentIssue false
  • English
  • Français

X-ray diffraction analysis of ultrathin platinum silicide films deposited on (100) silicon

Published online by Cambridge University Press:  05 March 2012

T. N. Blanton  and
C. R. Hoople
T. N. Blanton*
Affiliation:
Eastman Kodak Company, Research Laboratories, Rochester, New York 14650-2106
C. R. Hoople
Affiliation:
Eastman Kodak Company, Research Laboratories, Rochester, New York 14650-2106
*
a)Electronic mail: thomas.blanton@kodak.com
Get access Rights & Permissions [Opens in a new window]

Abstract

X-ray diffraction methods have been used successfully for the analysis of platinum silicide films of 100 Å or less in thickness. Conventional X-ray diffraction was utilized for phase identification, planar orientation, and crystalline size determination. Low-angle X-ray specular reflectivity analysis measured film thickness. As the nominal film thickness approached 100 Å, it was observed that the deposited platinum film thickness was larger than expected and longer anneal times would be required to ensure homogeneous platinum silicide phase composition.

Keywords

platinum silicidePtSireflectivitythin filmX-ray diffraction

Information

Type
Technical Articles
Information
Powder Diffraction , Volume 17 , Issue 1 , March 2002 , pp. 7 - 9
Copyright
Copyright © Cambridge University Press 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Bede Scientific (1998). 14 Inverness Drive East, Suite G-104, Englewood, CO 80112.Google Scholar
Blanton, T. N., and Hatwar, T. K. (2000). “Superlattice structures for magneto-optical storage applications,” Recent Research Developments in Magnetics, Vol. 1 (Transworld Research Network, India), 65–81.Google Scholar
Hatwar, T. K., and Blanton, T. N. (1997). “Highly ordered Co/Pt superlattice thin films prepared using ultrathin seed layers,” IEEE Trans. Magn. IEMGAQ 33, 3250–3252. emg, IEMGAQ Google Scholar
Jenkins, R., and Snyder, R. L. (1996). Introduction to X-ray Powder Diffraction (Wiley, New York), 90 pp.Google Scholar
Powder Diffraction File (2000). Sets 1–50, International Centre for Diffraction Data, 12 Campus Boulevard, Newtown Square, PA 19073-3273.Google Scholar