Hostname: page-component-54dcc4c588-dbm8p Total loading time: 0 Render date: 2025-10-12T02:29:05.842Z Has data issue: false hasContentIssue false
  • English
  • Français

Strength of Ge-Sb-Se Chalcogenide Glass Fibers

Published online by Cambridge University Press:  25 February 2011

Daniel R. Swiler ,
Arun K. Varshneya  and
Peter H. Prideaux
Daniel R. Swiler
Affiliation:
New York State College of Ceramics, Alfred University, Alfred, NY 14802
Arun K. Varshneya
Affiliation:
New York State College of Ceramics, Alfred University, Alfred, NY 14802
Peter H. Prideaux
Affiliation:
Galileo Electro-Optics Corp., Sturbridge, MA
Get access

Abstract

Strength of Ge-Sb-Se UV-cured acrylate coated chalcogenide glass fibers was measured in various environments using specially designed fixtures for testing in tensile and bending modes. The data are analyzed using Weibull statistics. Humid or water immersion initially lowered the observed strength of these fibers, presumably due to corrosion by the moisture which penetrated the semi-porous coating. However, after the glass surface became wetted, there was no evidence of further strength degradation (over 1.5 months of immersion).

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 88: Symposium P – Optical Fiber Materials and Properties , 1986 , 183
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Stachiw, J. D., Bertic, S. L., Naval Ocean Sys. Cent., San Diego, CA; Report 1982, NOSC/TR-634.Google Scholar
2. Kopinets, I. F., Migolinets, I. M., and Mikulaninets, S. V., Russ. J. of Phys. Chem., 54 7, (1980).Google Scholar
3. Sinclair, D., J. Appl. Phys. 21 380–386, (1980).Google Scholar
4. Patel, P. D., Chandan, H. C., Kalish, D., Int. Wire and Cable Symposium Proc., 37–43,(1981).Google Scholar
5. Pinnow, D. A., Dabby, F. W., Camlibel, I., J. Amer. Ceram. Soc. 58, 261, (1975).Google Scholar
6. France, P. W., Paradine, M. J., Reeve, M. H., Newns, G. R., J. Mater. Sci., 15, 825–830, (1980).Google Scholar
7. Matthewson, M. J., Kurkjian, C. R., Gulati, S. T. (submitted J. Am. Ceram. Soc.).Google Scholar