Hostname: page-component-84c44f86f4-rtkvj Total loading time: 0 Render date: 2025-10-15T03:00:33.735Z Has data issue: false hasContentIssue false
  • English
  • Français

Si/SiC UHV Direct Wafer Bonded Interface Structure

Published online by Cambridge University Press:  15 March 2011

M.J. Kim ,
Hong Xu ,
R.-J. Liu ,
M.J. Cox  and
R.W. Carpenter
M.J. Kim
Affiliation:
Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, AZ 85287-170, U.S.A.
Hong Xu
Affiliation:
Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, AZ 85287-170, U.S.A.
R.-J. Liu
Affiliation:
Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, AZ 85287-170, U.S.A.
M.J. Cox
Affiliation:
Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, AZ 85287-170, U.S.A.
R.W. Carpenter
Affiliation:
Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, AZ 85287-170, U.S.A.
Get access

Abstract

Planar (001)Si/(0001) Si-terminated 6H-SiC interfaces were synthesized by UHV diffusion bonding of cleaned, on-axis and vicinal wafers at 1100°C for 5 hours, at MPa pressure. The interfaces were crystalline up to their defining plane, without nanospectroscopically detectable impurities. The crack opening tests showed the interfaces were stronger than the Si substrates. Oxygen on the substrate surfaces resulted in silicon carbide on insulator (SiCOI) interface formation.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 587: Symposium O – Substrate Engineering - Paving the Way to Epitaxy , 1999 , O4.2
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Cioccio, L. Di, Tiec, Y. Le, Letertre, F., Jaussaud, C. and Bruel, M., Electron. Lett., 32, 1144 (1996).Google Scholar
2. Gregory, R.B., Wetteroth, T.A., Wilson, S.R., Holland, O.W. and Thomas, D.K., Appl. Phys. Lett., 75 (17), 2623 (1999).Google Scholar
3. Kim, M.J., Cox, M.J. and Xu, J., in Interfacial Engineering for Optimized Properties, ed. Briant, C.L., Carter, C.B. and Hall, E.L. (Mater. Res. Soc. Proc., 458, Pittsburgh, PA, 1997) pp. 327–332.Google Scholar
4. Hill, A. and Wallach, E.R., Acta Metall., 37(9), 2425 (1989).Google Scholar
5. Maszara, W.P., Goetz, G., Cavilia, A. and McKitterick, J.B., J. Appl. Phys., 64(10), 4943 (1988).Google Scholar
6. Tong, Q.-Y., Gösele, U., Yuan, C., Steckl, A. J. and Reiche, M., J. Electrochem. Soc., 142 (1), 232 (1995).Google Scholar