Hostname: page-component-54dcc4c588-sdd8f Total loading time: 0 Render date: 2025-10-08T04:44:58.506Z Has data issue: false hasContentIssue false
  • English
  • Français

Review of Corrosion Modes For Alloy 22 Regarding Lifetime Expectancy of Nuclear Waste Containers

Published online by Cambridge University Press:  11 February 2011

Raúl B. Rebak  and
John C. Estill
Raúl B. Rebak
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Ave. L-631, Livermore, CA 94550, USA
John C. Estill
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Ave. L-631, Livermore, CA 94550, USA
Get access

Abstract

Alloy 22 (UNS N06022) was selected to fabricate the corrosion resistant outer barrier of a two-layer nuclear waste package container. This paper reviews the main corrosion degradation modes that are predicted for the outer layer of the container. Current results show that the containers would perform well under general corrosion, localized corrosion and environmentally assisted cracking (EAC). For example, the general corrosion rate is expected to be below 100 nm/year and the container is predicted to be outside the range of potential for localized corrosion and environmentally assisted cracking.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 757: Symposium II – Scientific Basis for Nuclear Waste Management XXVI , 2002 , II4.1
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Yucca Mountain Science and Engineering Report, U. S. Department of Energy, Office of Civilian Radioactive Waste Management, DOE/RW-0539, Las Vegas, NV, May 2001.Google Scholar
2. Harrar, J. E., Carley, J. F., Isherwood, W. F., and Raber, E., Report on the Committee to Review the Use of J-13 Well Water in Nevada Nuclear Waste Storage Investigations, LLNL UCID Report 21867 (University of California, Livermore, January 1990).Google Scholar
3. Rosenberg, N. D., Gdowski, G. E. and Knauss, K. G., Applied Geochemistry, 16, 1231 (2001).Google Scholar
4. Farmer, J. C., McCright, R. D., Gdowski, G. E., Wang, F., Summers, T. S. E., Bedrossian, P., Horn, J. M., Lian, T., Estill, J. C., Lingenfelter, A. and Haalsey, W., PVP-ASME, 408, 53 (ASME, 2000: New York, NY).Google Scholar
5. Rebak, R. B., Summers, T. S. E., Lian, T., Carranza, R. M., Dillman, J. R., Corbin, T. and Crook, P., Paper 542, Corrosion/02 (NACE International, 2002: Houston, TX).Google Scholar
6. Dunn, D. S. and Brossia, C. S., Paper 02548, Corrosion/02 (NACE International, 2002: Houston, TX).Google Scholar
7. Lloyd, A. C., Shoesmith, D. W., McIntyre, N. S. and Noël, J. J., J. Electrochem. Soc., 150 (4), B120 (2003).Google Scholar
8. Evans, K. J. and Rebak, R. B. in Corrosion Science – A Retrospective and Current Status in Honor of Robert P. Frankenthal, PV 2002–13, p. 344–354 (The Electrochemical Society, 2002: Pennington, NJ).Google Scholar
9. Lian, T., Estill, J. C., Hust, G. A., Fix, D. V. and Rebak, R. B., Pressure Vessels and Piping ASME Conference in Vancouver (Canada) 4–8 August 2002, PVP-Vol. 449, 67 (ASME, 2002: New York, NY).Google Scholar
10. Wong, L. L., Fix, D. V., Estill, J. C., McCright, R. D. and Rebak, R. B. paper II4.4 presented at the Fall 2002 meeting of the Materials Research Society, Boston 2–6 December 2002 (to be published).Google Scholar
11. Annual Book of the ASTM Standards, Volume 03.02, Standard G 61 (ASTM, 2001: West Conshohocken, PA).Google Scholar
12. Tsujikawa, S. and Hisamatsu, Y., Corr. Eng. (Japan), 29, 37 (1980).Google Scholar
13. Rebak, R. B. in Corrosion and Environmental Degradation, Volume II, p. 69–111 (Wiley-VCH, 2000: Weinheim, Germany).Google Scholar
14. Rebak, R.B. and Crook, P., “Critical Factors in Localized Corrosion III,” 98–17, 289 (The Electrochemical Society, 1999: Pennington, NJ).Google Scholar
15. Gruss, K. A., Cragnolino, G. A., Dunn, D. S., Sridhar, N., Paper 98149, Corrosion/98 (NACE International, 1998: Houston, TX).Google Scholar
16. Dunn, D. S., Cragnolino, G. A. and Sridhar, N. in Scientific Basis for Nuclear Waste Management XXIII, Materials Research Society, 608, 89 (MRS, 2000: Warrendale, PA).Google Scholar
17. Dunn, D. S. and Brosia, C. S., Paper 125, Corrosion/01 (NACE International, 2001: Houston, TX).Google Scholar
18. Kehler, B. A., Ilevbare, G. O. and Scully, J. R., Corrosion, 57, 1042 (2001).Google Scholar
19. Pan, Y.-M., Dunn, D. S. and Cragnolino, G. A. in Environmentally Assisted Cracking: Predictive Methods for Risk Assessment and Evaluation of Materials, Equipment and Structures, ASTM STP 1401, p. 273 (ASTM, 2000: West Conshohocken, PA).Google Scholar
20. Dunn, D. S., Pan, Y.-M. and Cragnolino, G. A., Paper 02425, Corrosion/02 (NACE International, 2002: Houston, TX).Google Scholar
21. Rebak, R. B. in Environmentally Assisted Cracking: Predictive Methods for Risk Assessment and Evaluation of Materials, Equipment and Structures, ASTM STP 1401, p. 289 (ASTM, 2000: West Conshohocken, PA).Google Scholar
22. Estill, J. C., King, K. J., Fix, D. V., Spurlock, D. G., Hust, G. A., Gordon, S. R., McCright, R. D., Gordon, G. M. and Rebak, R. B., Paper 535, Corrosion/02 (NACE International, 2002: Houston, TX).Google Scholar
23. Fix, D. V., Estill, J. C., King, K. J., Day, S. D. and Rebak, R. B., Paper 03542, Corrosion/03 (NACE International, 2003: Houston, TX).Google Scholar
24. Andresen, P. L., Emigh, P. W., Young, L. M. and Gordon, G. M., Paper 130, Corrosion/01, (NACE International, 2001: Houston, TX).Google Scholar
25. Rebak, R. B., Dillman, J. R., Crook, P. and Shawber, C. V. V., Materials and Corrosion, 52, 289 (2001).Google Scholar
26. Pulvirenti, A. L., Needham, K. M., Adel-Hadadi, M. A., Marks, C. R., Gorman, J. A. and Barkatt, A., 713, 89 (MRS, 2002: Warrendale, PA)Google Scholar
27. Pulvirenti, A. L., Needham, K. M., Adel-Hadadi, M. A., Barkatt, A., Marks, C. R. and Gorman, J. A., Paper 551, Corrosion/02 (NACE International, 2002: Houston, TX).Google Scholar
28. King, K. J., Estill, J. C. and Rebak, R. B., Pressure Vessels and Piping ASME Conference in Vancouver (Canada) 4–8 August 2002, PVP-Vol. 449, 103 (ASME, 2002: New York, NY).Google Scholar
29. Gordon, G. M., Corrosion, 58, 811 (2002).Google Scholar