Hostname: page-component-54dcc4c588-b5cpw Total loading time: 0 Render date: 2025-10-07T02:33:44.603Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of Nitride Fuel by Spark Plasma Sintering Technique

Published online by Cambridge University Press:  01 February 2011

Hiroaki Muta ,
Ken Kurosaki ,
Masayoshi Uno  and
Shinsuke Yamanaka
Hiroaki Muta
Affiliation:
muta@see.eng.osaka-u.ac.jp, Osaka University, Graduate School of Engineering, 2-1 Yamadaoka, Suita, 565-0871, Japan, +81-6-6879-7905, +81-6-6879-7889
Ken Kurosaki
Affiliation:
kurosaki@see.eng.osaka-u.ac.jp, Osaka University, Division of Sustainable Energy and Environmental Engineering, Graduate Shool of Engineering, 2-1 Yamadaoka, Suita, 565-0871, Japan
Masayoshi Uno
Affiliation:
uno@see.eng.osaka-u.ac.jp, Osaka University, Division of Sustainable Energy and Environmental Engineering, Graduate Shool of Engineering, 2-1 Yamadaoka, Suita, 565-0871, Japan
Shinsuke Yamanaka
Affiliation:
yamanaka@see.eng.osaka-u.ac.jp, Osaka University, Division of Sustainable Energy and Environmental Engineering, Graduate Shool of Engineering, 2-1 Yamadaoka, Suita, 565-0871, Japan
Get access

Abstract

SPS technique was applied for fabrication of UN pellets. The dense sample was obtained with relatively low sintering temperature without any milling process and sintering additive, indicating that the SPS technique is suitable for fabrication of nitride fuel. The thermal conductivity and Young's modulus in axial direction were higher than those of reported values. EBSP analysis and electronic calculation supposed that weak grain orientation in [100] direction of the sample lead to these higher values.

Keywords

nitridesinteringthermal conductivity

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1043: Symposium T – Materials Innovations for Next-Generation Nuclear Energy , 2007 , 1043-T13-04
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Osaka, M., Serizawa, H., Kato, M., Nakajima, K., Tachi, Y., Kitamura, R., Miwa, S., Iwai, T., Tanaka, K., Inoue, M., and Arai, Y., J. Nucl. Sci. Technol., 44, 309 (2007).Google Scholar
2. Arai, Y., Iwai, T., Nakajima, K., Proc., Int., Conf., GLOBAL '97, Yokohama, Japan, 664 (1997).Google Scholar
3. Hayes, S. L., Thomas, J. K., and Peddicord, K. L., J. Nucl. Mater., 171, 289 (1990).Google Scholar
4. Ross, S. B., , El-Genk, Mohamed, S., and Matthews, R. B., J. Nucl. Mater., 170, 169 (1990).Google Scholar
5. Arai, Y., Morihira, M., and Ohmichi, T., J. Nucl. Mater., 202, 70 (1993).Google Scholar
6. Hayes, S. L., Thomas, J. K., and Peddicord, K. L., J. Nucl. Mater., 171 271 (1990).Google Scholar
7. Padel, A., and Novion, C. De, J. Nucl. Mater., 33, 40 (1969).Google Scholar