Hostname: page-component-54dcc4c588-dbm8p Total loading time: 0 Render date: 2025-10-09T07:26:43.549Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of Copper Aluminium Oxide by Spray Pyrolysis

Published online by Cambridge University Press:  15 March 2011

Ji Youn Rim ,
Shin Ae Song  and
Seung Bin Park
Ji Youn Rim
Affiliation:
Korea Advanced Institute of Science and Technology, Dept. of Chemical Engineering, 373-1, Guseong-dong, Yuseong-gu, Daejeon, 305-701, Republic of Korea
Shin Ae Song
Affiliation:
Korea Advanced Institute of Science and Technology, Dept. of Chemical Engineering, 373-1, Guseong-dong, Yuseong-gu, Daejeon, 305-701, Republic of Korea
Seung Bin Park
Affiliation:
Korea Advanced Institute of Science and Technology, Dept. of Chemical Engineering, 373-1, Guseong-dong, Yuseong-gu, Daejeon, 305-701, Republic of Korea
Get access

Abstract

Copper aluminium oxide(CuAlO2) particles, a promissing p-type TCO(transparent conducting oxide), were prepared by spray pyrolysis. Delafossite phase of CuAlO2 was obtained when copper nitrate, copper acetate and copper sulfate, divalent copper precursors, were used as copper precursor and aluminium nitrate as aluminium precursors. However, when copper chloride (CuCl, a monovalent copper precursor) was used, the delafossite phase was not obtained regardless of the type of aluminium precursor. The O2-doped CuAlO2 was obtained by using oxygen as carrier gas.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 703: Symposia U/V – Nanophase and Nanocomposite Materials IV , 2001 , V6.9
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Kawazoe, H., Yasukawa, M., Hyodo, H., Kurita, M., Yanagi, H. and Hosono, H., Nature 389, 30 (1997)Google Scholar
[2] Kodas, Toivo T. and Hampden-Smith, Mark J., Aerosol processing of materials Wiley-VCHGoogle Scholar
[3] Benko, F. A. and Koffyberg, F. P., J. Phys. Chem. Solids 45, pp 57–59 (1984)Google Scholar
[4] Thomas, Gordon, Nature 389, pp 907–908 (1997)Google Scholar
[5] Lee, M. S., Kim, T. Y., and Kim, D., Applied physics letters 79, 13, pp 2028–2030 (2001)Google Scholar
[6] Yanagi, H., Kawazoe, H., Kudo, A., Yasukawa, M. and Hosono, H., J. of Electroceramics 4:2/3, pp 407–414 (2000)Google Scholar