Hostname: page-component-54dcc4c588-54gsr Total loading time: 0 Render date: 2025-10-05T20:26:49.401Z Has data issue: false hasContentIssue false
  • English
  • Français

Preliminary Indications of a Slight Improvement in the Ductility of Ni3Ge With Boron

Published online by Cambridge University Press:  26 February 2011

J. Fang  and
E. M. Schulson
J. Fang
Affiliation:
Thayer School of Engineering, Dartmouth College, Hanover, NH 03755
E. M. Schulson
Affiliation:
Thayer School of Engineering, Dartmouth College, Hanover, NH 03755
Get access

Abstract

Preliminary work was conducted to investigate whether 0.1 at% boron affects the ductility of Ni-rich Ni3Ge (Ni-23.5 at%Ge). Cracks were observed in the unmodified alloy around hardness indentations and on fresh surfaces upon abrasive cutting. No cracks appeared in the modified alloy. Also, SEM fractographs showed that with the boron addition the morphology changed from pure intergranular fracture to a mixture of intergranular and transgranular fracture, albeit predominantly intergranular. Tensile tests indicated that the boron addition slightly improves the ductility of Ni-rich Ni3 Ge.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 751
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Aoki, K. and Izumi, O., Nippon Kinzoku Gakkaishi 43, 1190 (1979).Google Scholar
2. Liu, C. T., White, C. L. and Horton, J. A., Acta Metall. 33, 213 (1985).CrossRefGoogle Scholar
3. Schulson, E. M., Weihs, T. P., Baker, I., Frost, H. J. and Horton, J. A., Acta Metall. 34, 1395 (1986).Google Scholar
4. Takasugi, T. and Izumi, O., Acta Metall. 33, 1247 (1985).Google Scholar
5. Schulson, E. M., Briggs, L. J. and Baker, I., Acta Metall. 38, 207 (1990).Google Scholar
6. Taub, A. I., Huang, S. C. and Chang, K. M., Metall. Trans. 15A, 399 (1984).Google Scholar
7. Taub, A. I., Briant, C. L., Huang, S. C., Chang, K.-M. and Jackson, M. R., Scripta Met. 20, 129 (1986).CrossRefGoogle Scholar