Hostname: page-component-54dcc4c588-9xpg2 Total loading time: 0 Render date: 2025-10-13T01:47:39.438Z Has data issue: false hasContentIssue false
  • English
  • Français

Plasma Deposited Ni-Al-Mo Metal-Metal Composites

Published online by Cambridge University Press:  25 February 2011

M. R. Jackson  and
P. A. Siemers
M. R. Jackson
Affiliation:
General Electric Company, Corporate Research and Development, Schenectady, NY 12345
P. A. Siemers
Affiliation:
General Electric Company, Corporate Research and Development, Schenectady, NY 12345
Get access

Abstract

Six different composite microstructures were produced by low pressure plasma deposition of γ/γ'-α Ni-Al-Mo materials. Interlaminate spacing, volume fraction of α Mo, and continuity of the laminate structure were varied. Thermal expansion behavior (25–1250°C), density, and room temperature elastic modulus were correlated with volume fraction of α Mo. Tensile ductility (25–960°C) was correlated with both volume fraction and distribution of the α Mo phase, while yield strength was nearly insensitive to composite structure. Composite strengths were greater than were the unreinforced matrix strengths.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 98: Symposium K – Plasma Processing and Synthesis of Materials II , 1987 , 347
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Jackson, M.R., Rairden, J.R., Smith, J.S., and Smith, R.W., ”Production of Metallurgical Structures by Rapid Solidification Plasma Deposition,” J. Metals, 33: 23–27, 1981.Google Scholar
[2] Siemers, P.A., Jackson, M.R., Mehan, R.L., and Rairden, J.R., “Production of Composite Structures by Low Pressure Plasma Deposition,” Cer. Eng. and Sci. Proc., 6: 896–907, 1985.Google Scholar
[3] Jackson, M.R. and Mehan, R.L., “LPPD Iron Base Metal Matrix Composites,” to be published in Proc. ICCM-VI London, 1987.Google Scholar
[4] Ritter, A.M., ”Microstructure and Properties of Plasma Sprayed Steel/Carbide Composites, Doctoral Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1987.Google Scholar
[5] Jackson, M.R. and Ritter, A.M., “Chemical and Structural Compatibility in γ/γ'-α Composites,” Report 86CRD250, General Electric Corporate Research and Development, Schenectady, NY, 1987.Google Scholar
[6] Kaufman, L.A. and Nesor, H., “Calculation of Superalloy Phase Diagram: Part II,” Met. Trans 5: 1623–1929, 1974.Google Scholar
[7] Nash, P., Fielding, S., and West, D.R.F., “Phase Equilibria in Nickel- Rich Ni-Al-Mo and Ni-Al-W Alloys,” Met. Sci. 17: 192–194, 1983.Google Scholar
[8] Miracle, D.B., Lark, K.A., Srinivasan, V., and Lipsitt, H.A., “Nickel- Aluminum- Molybdenum Phase Equilibria,” Met. Trans. A. 15A: 481–486, 1984.Google Scholar