Hostname: page-component-54dcc4c588-rz4zl Total loading time: 0 Render date: 2025-10-10T07:51:14.180Z Has data issue: false hasContentIssue false
  • English
  • Français

Morphology, Deformation, and Defect Structures of TiCr2 in Ti-Cr Alloys

Published online by Cambridge University Press:  01 January 1992

Katherine C. Chen ,
Samuel M. Allen  and
James D. Livingston
Katherine C. Chen
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Samuel M. Allen
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
James D. Livingston
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

The morphologies and defect structures of TiCr2 in several Ti-Cr alloys have been examined by optical metallography, x-ray diffraction, and transmission electron microscopy (TEM), in order to explore the room-temperature deformability of the Laves phase TiCr2. The morphology of the Laves phase was found to be dependent upon alloy composition and annealing temperature. Samples deformed by compression have also been studied using TEM. Comparisons of microstructures before and after deformation suggest an increase in twin, stacking fault, and dislocation density within the Laves phase, indicating some but not extensive room-temperature deformability.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 373
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Sauthoff, G., Metallkd, Z.. 80, 337 (1989).Google Scholar
2. Fleischer, R.L. and Zabala, R.J., Metall. Trans. 21A, 2149 (1990).Google Scholar
3. Livingston, J.D. and Hall, E.L., J. Mater. Res., 5, 5 (1990).Google Scholar
4. Liu, Yaping, Allen, Samuel M., and Livingston, James D., Metall. Trans. 23A (1992).Google Scholar
5. Livingston, J.D., Phys. Stat. Sol. (a) 131, 415 (1992).Google Scholar
6. Murray, J.L., Bull. Alloy Phase Diagr. 2(2), 174 (1981); Binary Alloy Phase Diagrams. 2nd edition, Thaddeus B. Massalski, ed., (ASM International), pp. 1345-1348.Google Scholar
7. Blackburn, M.J. and Williams, J.C., Trans. TMS-AIME, 239, 287 (1967).Google Scholar
8. Spurling, R.A., Metall. Trans. 6A, 1660 (1975).Google Scholar
9. Sass, S.L., J. Less-Common Met. 28, 157 (1972).Google Scholar
10. Williams, J.C., DeFontaine, D. and Paton, N.E., Metall. Trans. 4, 2701 (1973).Google Scholar
11. Allen, C.W., Mat. Res. Soc. Symp. Proc. Vol 39, 141 (1985).Google Scholar