Hostname: page-component-54dcc4c588-wlffp Total loading time: 0 Render date: 2025-10-12T01:41:09.251Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure of Cement Blends Including Fly Ash, Silica Fume, Slag and Fillers

Published online by Cambridge University Press:  25 February 2011

Micheline Regourd
Micheline Regourd*
Affiliation:
Microstructures Department, Cerilh, 23 rue de Cronstadt, 75015 Paris, France
Get access

Abstract

The hydration of a blended cement through hydraulic or pozzolanic reactions results in heterogeneous polyphase materials. Because portland cement clinker is the major component in most cement blends, the microstructural development of portland cement hydrates, including C-S-H and pore structures, is first discussed. Slag, fly ash, silica fume and limestone filler cements are then compared to portland cement with regards to C-S-H morphology and composition, aluminate crystallization, cement paste interfaces and pore size distribution.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 86: Symposium N – Fly Ash and Coal Conversion By-Products III , 1986 , 185
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Taylor, H.F.W., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. I, pp. 82–110.Google Scholar
2. Diamond, S., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. I, pp. 122–147.Google Scholar
3. Uchikawa, H., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. I, pp. 249–280.Google Scholar
4. Harrisson, A.M., Taylor, H.F.W. and Winter, N.B., Cem. Concr. Res. 15, 775–780 (1985).Google Scholar
5. Taylor, H.F.W., Proc. Brit. Ceram. Soc. 35, 65–82 (1984).Google Scholar
6. Groves, G.W., Philos. Trans. R. Soc. London A 310, 79–83 (1983).Google Scholar
7. Dalgleish, B.J. and Ibe, K., Cem. Concr. Res. 11, 729–739 (1981).Google Scholar
8. Scrivener, K.L. and Pratt, P.L., in Proc. 6th. Int. Conf. Cem. Microsc., (ICMA, Duncanville, 1984) pp. 145–155.Google Scholar
9. Marchese, B., Il Cemento 80, 107–120 (1983).Google Scholar
10. Bailey, J.E. and Stewart, H. R, J. Mater. Sci. Lett. 3, 411–414 (1984).Google Scholar
11. Jennings, H.M. and Johnson, S.K., J. Amer. Ceram. Soc. 69 (11), 790–795 (1986).Google Scholar
12. Jennings, H.M., Dalgleish, B.J., Pratt, P. L, J. Amer. Ceram. Soc. 64, 567–572 (1981).Google Scholar
13. Scrivener, K.L., PhD thesis, Imperial College, University of London (1984).Google Scholar
14. Hadley, D.N., PhD thesis, Purdue University (1972).Google Scholar
15. Diamond, S., in Hydraulic Cement Pastes (Cement and Concrete Association, Wexham Springs, 1976) pp. 2–30.Google Scholar
16. Taylor, H.F.W., J. Amer. Ceram. Soc. 69 (6), 464–467 (1986).Google Scholar
17. Henderson, E. and Bailey, J. E, in Proc. 8th Int. Congr. Chem. Cem.. Rio, 1986, Vol. III, pp. 376–381.Google Scholar
18. Clayden, N.J., Dobson, C.M., Groves, G.M. and Rodger, S. A, in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. III, pp. 51–56.Google Scholar
19. Winslow, D.N., Cem. Concr. Res. 15, 817–824 (1985).Google Scholar
20. Damme, H. Van, (Personal Communication) (1986).Google Scholar
21. Feldman, R.F., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol.1, 336–356.Google Scholar
22. Parrott, L.J., Philos. Trans. R. Soc. London, A 310, 155–166 (1983).Google Scholar
23. Jennings, H.M., Grimes, J. and Brown, P.L., U.S Patent Application (1986).Google Scholar
24. Parrott, L.J., Patel, R.G., Killoh, D.C and Jennings, H.M., J. Amer. Ceram. Soc. 67, 233–237 (1984).Google Scholar
25. Regourd, M., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. I, pp. 200–229.Google Scholar
26. Tanaka, H., Totani, Y. and Saito, Y., in Proc. 1st Int. Conf. on the Use of Fly Ash, Silica Fume and Other Mineral By-Products in Concrete, edited by Malholtra, V.M., ACI SP 79 (American Concrete Institute, Detroit, 1983) Vol. 2, pp. 963–977.Google Scholar
27. Frearson, J.P.H. and Uren, J.M., in Proc Int. Conf. Fly Ash, Silica Fume, Slag and Natural Pozzolanics in Concrete, edited by Malhotra, V.M., ACI SP 91–69 American Concrete Institute, Detroit, 1986) Vol.2, pp. 1401–1421.Google Scholar
28. Demoulian, E., Gourdin, P., Hawthorn, F. and Vernet, C., in Proc. 7th Int. Conpr. Chem. Cem., Paris, 1980 Vol. II, pp. 89–94.Google Scholar
29. Mascolo, G. and Marine, O., in Proc. 7th Int. Congr. Chem. Cem.. Paris, 1980 Vol. II, pp. 23–29.Google Scholar
30. Harrisson, A.M., Winter, W.B. and Taylor, H.F.W., in Proc. 8th Int. Congr. Chem. Cem., Rio, 1986, Vol. IV, pp. 170–175.Google Scholar
31. Scrivener, K.L., Baldie, K.D., Halse, Y., Pratt, P.L.. in Very High Strength Cement-Based Materials, edited by Young, J.F., Mat. Res. Soc. Symp. Proc. Vol. 42 (Materials Research Society, Pittsburgh, 1985) pp. 39–43.Google Scholar
32. Regourd, M., in Condensed Silica Fume, edited by Aitcin, P.C (Sherbrooke University, 1983) pp. 20–24.Google Scholar
33. Regourd, M., Montureux, B. and Hornain, H., in Proc. 1st Int. Conf. on the Use of Fly Ash, Silica Fume and Other Mineral By-Products in Concrete, edited by Malholtra, V.M., ACI SP 79 (American Concrete Institute, Detroit, 1983) Vol.2, pp. 847–865.Google Scholar
34. Bachiorrini, A., Thesis, University of Lyon (1985).Google Scholar
35. Montureux, B., Hornain, H. and Regourd, M., Int. Coll. Liaison, Pate de ciment - Materiaux Associes (Toulouse) A 64 (1982).Google Scholar
36. Gegout, P., Hornain, H., Thuret, B., Montureux, B., Volant, J. and Regourd, M., in Proc. 8th Int. Congr. Chem. Cem.. Rio, 1986, Vol. IV, pp. 197–203.Google Scholar
37. Roy, D.M. and Parker, K.M., in Proc. 1st Int. Conf. on the Use of Fly Ash. Silica Fume and Other Mineral By-Products in Concrete, edited by Malholtra, V.M., ACI SP 79 (American Concrete Institute, Detroit, 1983) Vol. I, pp. 397–411.Google Scholar