Hostname: page-component-54dcc4c588-dbm8p Total loading time: 0 Render date: 2025-10-08T19:19:09.877Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Stability of Passivation Films Deposited on Aluminium Substrates

Published online by Cambridge University Press:  21 February 2011

P. Scafidi ,
M. Ignat  and
M. Dupeux
P. Scafidi
Affiliation:
Laboratoire do Thermodynamique et de Physico-Chimie Métallurgiques, Institut National Polytechnique de Grenoble, B.P. 75, Domaine Universitaire, F-38402 Saint-Martin d'Hères -, France
M. Ignat
Affiliation:
Laboratoire do Thermodynamique et de Physico-Chimie Métallurgiques, Institut National Polytechnique de Grenoble, B.P. 75, Domaine Universitaire, F-38402 Saint-Martin d'Hères -, France
M. Dupeux
Affiliation:
Laboratoire do Thermodynamique et de Physico-Chimie Métallurgiques, Institut National Polytechnique de Grenoble, B.P. 75, Domaine Universitaire, F-38402 Saint-Martin d'Hères -, France
Get access

Abstract

The damage of films of two different passivation materials deposited on aluminium substrates was investigated. These systems were subjected to uniaxial stretch in an in situ tensile testing device adapted to a scanning electron microscope. Successive stages of crack development were observed: the failure is first in the film, then at the interface. The presence of a thermally grown aluminium oxide interlayer delays the decohesion process. The substrate surface roughness weakens the systems. The evolution of the crack density with the longitudinal strain was analysed and then fitted with a model based on a Weibull distribution function.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 309: Symposium M2 – Materials Reliability in Microelectronics III , 1993 , 55
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Kitigawa, H., Proc. 26th Ann. Reliab. Phys. Symp, IEEE, New York, 1987.Google Scholar
[2] Flinn, P.A., in Stress-induced Phenomena in Metallization, edited by Li, C., Totta, P., Ho, P., (AIP Conf. Proc. 263, Amer. Inst. of Phys., New York, 1992), pp. 73–88.Google Scholar
[3] Mézin, A., Thin Sol. Films, 172, 197–209 (1989); 185, 57-59 (1990).CrossRefGoogle Scholar
[4] Hu, M.S., Evans, A.G., Acta Metall., 37(3), 917–925 (1989).Google Scholar
[5] Benard, J., L'oxydation des mitaux, Tome II, edited by Gauthier-Villars, , 1964.Google Scholar
[6] Molins, R., Ignat, M., Electron Microscopy, Vol.1, EUREM 92, Granada, Spain, 1992.Google Scholar
[7] Gille, G., Wetzig, K., Thin Solid Films, 110, 37–54 (1983).CrossRefGoogle Scholar
[8] Gandhi, C., Ashby, M.F., Acta. Metall., 27, 1565–1602 (1979).CrossRefGoogle Scholar
[9] Mattox, D.M., in Deposition technology for films and coatings, edited by Bunshah, R.F., New Jersey, 1982, pp. 63–82.Google Scholar
[10] Scafidi, P., Fissuration et Rerte d'adhérence de couches de passivation sur substrats d'aluminium, DEA SGM, ENSEEG, INPG, Grenoble, France, 1992.Google Scholar