Hostname: page-component-54dcc4c588-54gsr Total loading time: 0 Render date: 2025-10-06T19:18:00.505Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Evaporated Gold Films. Hard Substrate Effect Correction

Published online by Cambridge University Press:  01 February 2011

Ke Du ,
Xiaolu Pang ,
Chi Chen  and
Alex A. Volinsky
Ke Du
Affiliation:
kndu@mail.usf.edu, University of South Florida, Mechanical Engineering, 4202 E Fowler Ave. ENB118, Tampa, FL, 33620, United States, 813-974-5658, 813-974-3539
Xiaolu Pang
Affiliation:
xiaolupang@gmail.com, University of South Florida, Department of Mechanical Engineering, 4202 E Fowler Ave. ENB118, Tampa, FL, 33620, United States
Chi Chen
Affiliation:
cchen7@mail.usf.edu, University of South Florida, Department of Mechanical Engineering, 4202 E Fowler Ave. ENB118, Tampa, FL, 33620, United States
Alex A. Volinsky
Affiliation:
volinsky@eng.usf.edu, University of South Florida, Mechanical Engineering, 4202 E Fowler Ave. ENB118, Tampa, FL, 33620, United States, 813-974-5658, 813-974-3539
Get access

Abstract

Nanoindentation tests using the Berkovich indenter tip were performed on 50 and 200 nm thick polycrystalline gold films deposited on hard substrates. Gold film hardness increased with the indentation depth due to the influence of the substrate. A procedure based on the Joslin-Oliver method was introduced to correct for the substrate effect. The method utilizes the fact that the measured elastic modulus does not change significantly with the indentation depth, which allows reducing the contact area variation used in the hardness calculation.

Keywords

Aunano-indentationthin film

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1086: Symposium U – Mechanics of Nanoscale Materials , 2008 , 1086-U08-41
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1 Read, D.T. and Dally, J.W., J. Mater. Res. 8 (1993) 1542.Google Scholar
2 Zhang, T.-Y., Wang, X., Huang, B., Mater. Sci. and Eng. A 409 (2005) 329.Google Scholar
3 Baker, S.P. and Nix, W.D., J. Mater. Res. 9 (1994) 3131, 3145.Google Scholar
4 Elmastafa, A.A., Stone, D.S., Acta Mater. 50 (2002) 3641.Google Scholar
5 Saha, R., Nix, W.D., Acta Mater. 50 (2002) 23.Google Scholar
6 Zhao, M., Chen, X., Xiang, Y., Vlassak, J.J., Lee, D., Ogasawara, N., Chiba, N., Gan, Y.X., Acta Mater. 55 (2007) 6260.Google Scholar
7 Pharr, G.M., Oliver, W.C., and Brotzen, F., J. Mater. Res. 1 (1986) 601.Google Scholar
8 Joslin, D.L., Oliver, W.C., J. Mater. Res. 5 (1990) 123.Google Scholar
9 Han, S.M., Saha, R., Nix, W.D., Acta Mater. 54 (2006) 1571.Google Scholar
10 King, R.B., Int. J. Solid. Struct. 23 (1987) 1657.Google Scholar
11 Kramer, D.E., Volinsky, A.A., Moody, N.R. and Gerberich, W.W., J. Mater. Res. 16 (2001) 3150.Google Scholar