Hostname: page-component-54dcc4c588-42vt5 Total loading time: 0 Render date: 2025-10-06T07:19:42.587Z Has data issue: false hasContentIssue false
  • English
  • Français

The Fabrication of High-Speed Electronic Devices by Ion-Beam Synthesis of GexSi1-x Strained Layers

Published online by Cambridge University Press:  03 September 2012

R. G. Elliman ,
H. Jiang ,
W. C. Wong  and
P. Kringhøj
R. G. Elliman
Affiliation:
Electronic Materials Engineering Department, R.S.Phys. S.E., Institute of Advanced Study, Australian National University, Canberra, ACT 0200.
H. Jiang
Affiliation:
Electronic Materials Engineering Department, R.S.Phys. S.E., Institute of Advanced Study, Australian National University, Canberra, ACT 0200.
W. C. Wong
Affiliation:
Electronic Materials Engineering Department, R.S.Phys. S.E., Institute of Advanced Study, Australian National University, Canberra, ACT 0200.
P. Kringhøj
Affiliation:
Electronic Materials Engineering Department, R.S.Phys. S.E., Institute of Advanced Study, Australian National University, Canberra, ACT 0200.
Get access

Abstract

GexSi1-x, strained layers can be fabricated by Ge implantation and solid-phase epitaxy and can be used in electronic devices to improve their performance. Several important materials science issues are addressed, including the effect of the strain on solid-phase-epitaxy, the effect of oxidation on the implanted Ge distribution, and the effect of Ge on the oxidation rate of Si. The potential of this process is demonstrated by comparing the performance of metal-oxidesemiconductor field-effect-transistors (MOSFETs) employing ion-beam synthesised GeSi strained layer channel regions with that of Si-only devices.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 438: Symposium A – Materials Modificaton and Synthesis by Ion Beam… , 1996 , 217
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Bean, J.C., Proceeding of the IEEE, 80, 571 (1992).Google Scholar
2. Nayak, D.K., Woo, J.C.S., Wang, G.K. and MacWilliam, K. P., IEEE Electron Dev. Lett., 12, 154 (1991)Google Scholar
3. Paine, D.C., Howard, D.J., and Stoffel, N.G., J. Electron. Mat., 20, 735 (1991)Google Scholar
4. Elliman, R.G., and Wong, W.C., Nucl. Instr. Meth. B80/81, 768 (1993)Google Scholar
5. Elliman, R.G., Wong, W.C. and Kringhoj, P., Mat. Res. Soc. Symp. Proc. 321, 375 (1994)Google Scholar
6. Jiang, H. and Elliman, R.G., IEEE Trans. Electron. Dev., 43, 97 (1996)Google Scholar
7. Eugene, J., LeGoues, F.K., Kesan, V.P., Iyer, S.S. and d'Heurle, F.M., Appl. Phys. Lett., 59, 78 (1991).Google Scholar
8. Liu, W.S., Lee, E.W., Nicolet, M-A., Arbet-Engels, V., Wang, K. L, Abuhadba, N.M. and Aita, C.R., J. Appl. Phys., 71, 4015 (1992).Google Scholar
9. Sze, S.M., ‘Semiconductor Devices - Physics and Technology’, Wiley, NY (1985)Google Scholar