Hostname: page-component-54dcc4c588-trf7k Total loading time: 0 Render date: 2025-10-09T04:11:52.622Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of PZT Suspensions for Ceramic Ink-Jet Printing

Published online by Cambridge University Press:  11 February 2011

B. Derby ,
D. H. Lee ,
T. Wang  and
D. Hall
B. Derby
Affiliation:
Manchester Materials Science Centre, UMIST and the University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
D. H. Lee
Affiliation:
Manchester Materials Science Centre, UMIST and the University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
T. Wang
Affiliation:
Manchester Materials Science Centre, UMIST and the University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
D. Hall
Affiliation:
Manchester Materials Science Centre, UMIST and the University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
Get access

Abstract

The direct ink-jet printing of ceramic powders requires the development of highly fluid suspensions of ceramic particles with viscosity < 40 mPas. Here we describe the development of two such ceramic suspensions, which contain up to 30% by volume of PZT particles in either an azeotropic mixture of MEK and ethanol or in an alkane wax at 120 °C. The influence of various processing parameters on fluid rheology are investigated and trial fluids have been passed through an ink-jet printing head.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 758: Symposium LL – Rapid Prototyping Technologies , 2002 , LL3.7
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Sachs, E., Cima, M., Williams, P., Brancazio, D., and Cornie, J., J. Eng. Industry - Trans. ASME 114, 481 (1992).Google Scholar
2. Blazdell, P. F. and Evans, J. R. G., J. Mater. Process. Tech. 99, 94 (2000).Google Scholar
3. Slade, C. E. and Evans, J. R. G., J. Mater. Sci. Lett. 17, 1669 (1998).Google Scholar
4. Xiang, Q. F., Evans, J. R. G., Edirisinghe, M. J., and Blazdell, P. F., Proc. Inst. Mech. Eng. B – J. Eng. Manuf. 211, 211 (1997)Google Scholar
5. Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., and Derby, B., Journal of the American Ceramic Society, 84, (2001) 2514–2420.Google Scholar
6. Ainsley, C., Reis, N. and Derby, B., J. Mater. Sci. 35, 3155 (2002).Google Scholar
7. Song, J.H. and Evans, J.R.G., J. Rheol. 40, 131–152 (1996).Google Scholar