Hostname: page-component-54dcc4c588-5q6g5 Total loading time: 0 Render date: 2025-10-05T18:49:11.306Z Has data issue: false hasContentIssue false
  • English
  • Français

Densification Models for Plasma Sprayed Metal Matrix Composite Foils

Published online by Cambridge University Press:  21 February 2011

D. M. Elzey ,
J. M. Kunze ,
J. M. Duva  and
H. N. G. Wadley
D. M. Elzey
Affiliation:
University of Virginia, Charlottesville, VA 22901
J. M. Kunze
Affiliation:
University of Virginia, Charlottesville, VA 22901
J. M. Duva
Affiliation:
University of Virginia, Charlottesville, VA 22901
H. N. G. Wadley
Affiliation:
University of Virginia, Charlottesville, VA 22901
Get access

Abstract

The development of a constitutive model describing the deformation response of plasma sprayed metal matrix composite (MMC) foils during hot isostatic pressing (HIP) is described. A representative volume element of the composite is chosen whose constitutive behavior, including inelastic compressibility, is analyzed for the particular case of constrained uniaxial compression. Results of this preliminary model for the case of a SCS–6/Ti–14wt%Al–21wt%Nb intermetallic matrix composite are presented in the form of a density–pressure HIP map.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 207: Symposium I – Mechanical Properties of Porous and Cellular Materials , 1990 , 109
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Mehrabian, R., Mat. Res. Soc. Symp. Proc., 120 (3), (1988).CrossRefGoogle Scholar
2. Backman, D.G., JOM, July 1990, p.17.CrossRefGoogle Scholar
3. Helle, A.S., Easterling, K.E. and Ashby, M.F., Acta Metall., 33, 2163, (1985).CrossRefGoogle Scholar
4. Arzt, E., Ashby, M.F. and Easterling, K.E., Met. Trans., 14A, 211, (1983).CrossRefGoogle Scholar
5. Fischmeister, H.F. and Arzt, E., Pow. Metall., 26 (2), 82, (1983).CrossRefGoogle Scholar
6. Wilkinson, D.S., Acta Metall., 23, 1277, (1975).CrossRefGoogle Scholar
7. Gurson, A.L., Trans. ASME, Jan. 1977 p2.Google Scholar
8. Castaneda, P.P., J. Mech. Phys. Solids, (1990), in press.Google Scholar