Hostname: page-component-54dcc4c588-scsgl Total loading time: 0 Render date: 2025-10-11T21:06:51.879Z Has data issue: false hasContentIssue false
  • English
  • Français

Corrosion Behavior of Carbon Steel and Stainless Steel Materials under Salt Deposits in Simulated Dry Repository Environments

Published online by Cambridge University Press:  11 February 2011

Lietai Yang ,
Roberto T. Pabalan ,
Lauren Browning  and
Darrell S. Dunn
Lietai Yang
Affiliation:
Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 78238–5166, U.S.A.
Roberto T. Pabalan
Affiliation:
Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 78238–5166, U.S.A.
Lauren Browning
Affiliation:
Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 78238–5166, U.S.A.
Darrell S. Dunn
Affiliation:
Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 78238–5166, U.S.A.
Get access

Abstract

In-situ coupled multielectrode array sensors were used to measure the non-uniform corrosion of carbon steel and stainless steel materials under KCl salt deposit in simulated dry repository environments. It was found that the initiation of non-uniform corrosion occurs at a relative humidity that is 14% lower than the deliquescence relative humidity of the chloride salt. It was found also that once significant corrosion had occurred, the non-uniform corrosion process for the carbon steel material under the salt deposit continues at relative humidities as low as 27%.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 757: Symposium II – Scientific Basis for Nuclear Waste Management XXVI , 2002 , II4.14
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Civilian Radioactive Waste Management System Management and Operating Contractor, “Environment on the Surfaces of the Drip Shield and Waste Package Outer Barrier”, Office of Civilian Radioactive Waste Management System, Management and Operating Contractor, Las Vegas, NV, ANL–EBS–MD–000001, Revision 00 ICN 01, 2000.Google Scholar
2. Pabalan, R. T., Yang, L. and Browning, L., “Deliquescence behavior of multicomponent salts: effects on the drip shield and waste package chemical environment at the proposed nuclear waste repository at Yucca Mountain, Nevada” in Scientific Basis for Nuclear Waste Management XXV, Warrendale, PA: Materials Research Society, M.R.S. Symposium Proceedings Vol. 713, pp. 37–44, 2002.Google Scholar
3. Brossia, C.S., Browning, L., Dunn, D.S.. Moghissi, O.C., Pensado, O. and Yang, L.. “Effect of Environment on the Corrosion of Waste Package and Drip Shield Materials,” CNWRA 2001–003, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses, 2001.Google Scholar
4. Civilian Radioactive Waste Management System Management and Operating Contractor, “Waste Package Degradation Process Model Report,” TDR-WIS-MD-000002 Revision 00 ICN 02 (Las Vegas, NV, Office of Civilian Radioactive Waste Management System, Management and Operating Contractor, 2000).Google Scholar
5. Yang, L., Pabalan, R.T., and Browning, L.. “Experimental determination of the deliquescence relative humidity and conductivity of multicomponent salt mixtures”, in Scientific Basis for Nuclear Waste Management XXV, Warrendale, PA: Materials Research Society, M.R.S. Symposium Proceedings Vol. 713, pp. 135–142, 2002.Google Scholar
6. Yang, L., Sridhar, N., Pensado, O., and Dunn, D. S., “An In-situ Galvanically Coupled Multielectrode Array Sensor for Localized Corrosion”, Accepted for publication by Corrosion (November, 2002).Google Scholar
7. Yang, L., and Dunn, D. S., “Evaluation of Corrosion Inhibitors in Cooling Water Systems Using a Coupled Multielectrode Array Sensor” CORROSION/2002, paper no. 02004, (Houston, TX: NACE International, 2002).Google Scholar
8. Greenspan, L., Journal of Research of the National Bureau of Standards. 81A, 89–96 (1977).Google Scholar
9. Turgoose, S., “The nature of surviving iron objects”, Conservation of Iron, Nature Maritime Museum Monograph No. 53, National Maritime Museum, Greenwich, pp. 1–7, 1982.Google Scholar
10. Isaacs, H.S., Cho, J.H., Rivers, M.L. and Sutton, S.R., “In-situ X-ray microprobe study of salt layers during anodic dissolution of stainless steel in chloride solution”, J. Electrochem. Soc., Vol. 142, pp. 1111–1118, 1995.Google Scholar