Hostname: page-component-54dcc4c588-sdd8f Total loading time: 0 Render date: 2025-10-13T10:30:33.533Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of High Strength Cu/Ag Multilayered Composites

Published online by Cambridge University Press:  10 February 2011

Qing Zhai ,
Dan Kong ,
Augusto Morrone  and
Fereshteh Ebrahimi
Qing Zhai
Affiliation:
Materials Science & Engineering Department, University of Florida, Gainesville, FL 32611
Dan Kong
Affiliation:
Materials Science & Engineering Department, University of Florida, Gainesville, FL 32611
Augusto Morrone
Affiliation:
Materials Science & Engineering Department, University of Florida, Gainesville, FL 32611
Fereshteh Ebrahimi
Affiliation:
Materials Science & Engineering Department, University of Florida, Gainesville, FL 32611
Get access

Abstract

In this study, electrodeposition was employed to produce Cu-Ag multilayered nanocomposites using a single-bath cyanide solution. The silver and the copper layers were applied by electroless deposition and galvanostatic electrodeposition methods, respectively. The as-deposited composite showed a very high strength, which was increased upon annealing at 104°C. Annealing at 149°C caused the strength to drop to a level comparable to the strength of electrodeposited pure copper specimens. In this paper, the effect of heat treatment on the mechanical properties and structure of Cu-Ag multilayered nanocomposites is discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 451: Symposium P – Electrochemical Synthesis and Modification , 1996 , 489
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Hillard, J. E. et al, J. Appl. Phys. 57 (4), 1076 (1985)Google Scholar
[2] Lashmore, D. S., Dariel, M. P., J. Electrochem. Soc. 135 (5) 1218 (1988)Google Scholar
[3] Tench, D. M., White, J. T., Microcomposites and Nanophase materials, edited by Van Aken, D. C., et al, (The minerals, metals & Materials Society, 1991) 53 Google Scholar
[4] Gleiter, H., Progress in Materials Science, 33 (1989) 223 Google Scholar
[5] Siegel, R.W. et al, Nanostructured materials, 1 (1992) 185 Google Scholar
[6] Tench, D. M., White, J. T., J. Electrochem. Soc., 139, (2), P. 443 (1992)Google Scholar
[7] Tench, D. M., White, J. T., J. Mater. Sci. 27 5286 (1992)Google Scholar
[8] Weertman, J. R. et al, Solid State Phenomena 35 (30) 249 (1994)Google Scholar