Hostname: page-component-54dcc4c588-mz6gc Total loading time: 0 Render date: 2025-10-08T19:57:25.447Z Has data issue: false hasContentIssue false
  • English
  • Français

Epitaxy of SiC Films on Sapphire by Laser CVD

Published online by Cambridge University Press:  25 February 2011

Hirohide Nakamatsu  and
Shichio Kawai
Hirohide Nakamatsu
Affiliation:
The Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567, JAPAN
Shichio Kawai
Affiliation:
The Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567, JAPAN
Get access

Abstract

ArF excimer laser CVD was performed in a very-low pressure reactor. C2H2 and Si2H6 were used as source gases and carrier gases were not used. Epitaxial 3C-type SiC(111) grew parallel to α-Al2O3 (0001) substrate. It had a twin structure. Mismatch between the lattice parameters was estimated to be 12%. The epitaxial growth occurred down to 980°C and the films about 0.5μm in thickness grew at 1150°C for 30 minutes. Unirradiated films were polycrystalline or spontaneously peeling-off epitaxial films, while irradiated ones were strongly adherent epitaxial films.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 97: Symposium I – Novel Refractory Semiconductors , 1987 , 189
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Johnson, E.O., RCA Rev. 26, 163 (1965).Google Scholar
2. Keyes, R.W., in Silicon Carbide -1973, edited by Marshall, R.C., Faust, J.W. and Ryan, C.E. (University of South Carolina Press, Columbia, 1974), p. 534.Google Scholar
3. Scace, R. I. and Slack, G.A., J. Chem. Phys..30 1551 (1959).Google Scholar
4. Nishino, Shigehiro, Hazuki, Yoshikazu, Matsunami, Hiroyuki and Tanaka, Tetsuro, J. Electrochem. Soc. 127, 2674 (1980).Google Scholar
5. Nishino, Shigehiro, Powell, J.A. and Will, H.A., Appl. Phys. Lett. 42, 460 (1983).Google Scholar
6. Rohan, J.J. and Sampson, J.L., J. Phys. Chem. Solid. supp. 1, 523 (1976).Google Scholar
7. Misawa, Shunji, Yoshlda, Sadafumi and Gonda, Shun-Jchi, Shinku 25, 727 (1982) (in Japanese).Google Scholar
8. Tsao, J.Y. and Ehrlich, D.J., in Laser-Controlled Chemical Processing of Surfaces, edited by Johnson, A.W., Ehrlich, D.J. and Schlossberg, H.R., (North-Holland, New York, 1984), p. 115.Google Scholar
9. Solanki, R., Ritchie, W.H. and Collins, G.J., Appl. Phys. Lett. 43, 454 (1983).Google Scholar
10. Boyer, P.K., Roche, C.A., Ritchie, W.H. and Collins, G.J., Appl. Phys. Lett. 40, 716 (1982).Google Scholar
11. Philipp, H.R., Phys. Rev. 111, 440 (1958).Google Scholar
12. Nakayama, Toshio and Watanabe, K., J. Chem. Phys. 40, 558 (1964).Google Scholar
13. Itoh, Uichi, Toyoshima, Yasutake and Onuki, Hideo, J. Chem. Phys. 85, 4867 (1986).Google Scholar
14. Smithells, C.J., Metals Reference Book, vol.3 (Butterworths, London, 1967), p. 727.Google Scholar
15. ASTM 29–1129, Powder Diffraction File, (the American Society for Testing and Materials).Google Scholar
16. Kronberg, M.L., Acta Metallur. 5, 507 (1957).Google Scholar
17. Fagen, E.A., in Silicon Carbide -1973, edited by Marshall, R.C., Faust, J.W. and Ryan, C.E. (University of South Carolina Press, Columbia, 1974), p. 542.Google Scholar